Bernhardt Recliner Parts (Buy Replacement Parts)

Need a quick fix for your Bernhardt recliner? Here’s a friendly guide to common replacement parts—handles, cables, motors, and power bits—plus where to snag them online. We’ll also show you how to ID the exact piece you need, the tiny toolkit that covers most repairs, and easy maintenance tips to keep things smooth.

Buy Bernhardt Recliner Parts Online

Pull Handle & Release Cable Kit
Classic fix for manual recliners that won’t open properly. Measure exposed cable length and end fitting (S‑hook, barrel, or D‑pull) to match your original hardware. » find on amazon / find on ebay

Actuator / Linear Motor (Footrest or Headrest)
Power models often use OKIN/Limoss/KD‑style actuators. Match model number, stroke length, connector type, and mounting clevis size for a drop‑in swap. » find on amazon / find on ebay

Power Supply / Transformer (29V)
External 29V DC adapter with safety quick‑disconnect. Confirm voltage, amperage (2–3A typical), and two‑pin vs. five‑pin plugs before ordering. » find on amazon / find on ebay

Hand Control / Switch Panel
2–6 button remotes for power recline, headrest, and lumbar. Match pin count (often 5‑pin), plug orientation, and bezel shape. » find on amazon / find on ebay

Footrest Spring & Pivot Hardware
Restores footrest tension and smooth action on manual chairs. Replace springs in pairs for balanced movement. » find on amazon / find on ebay

Base Swivel / Glide Bearings
Cure wobble and grinding with replacement bearing rings or bushings. Verify diameter, bolt pattern, and stack height. » find on amazon / find on ebay

USB Cup Holder / Power Hub
Drop‑in modules with USB charging and lighting. Confirm cutout size and harness style before ordering. » find on amazon / find on ebay

How to Identify the Right Bernhardt Recliner Parts

Flip the chair and locate the product/serial tag (often under the seat). Photograph the broken part and all connectors. Note actuator brand (OKIN/Limoss/KD), model numbers, plug style (two‑pin vs. five‑pin), and stroke length. Measure cables end‑to‑end. If you’re unsure, message the seller with photos for a quick compatibility check.

Basic Tools for Repairing Bernhardt Recliners

  • Phillips and flat screwdrivers (short + long)
  • Metric/SAE hex key set
  • Socket set + adjustable wrench
  • Needle‑nose pliers; snap‑ring pliers
  • Multimeter (simple voltage checks)
  • Zip ties, electrical tape, blue threadlocker

Keep a bright flashlight or headlamp handy. Always unplug power before working and label connectors with masking tape. Take photos during teardown so reassembly is painless. For springs or heavy parts, recruit a helper and protect floors with a towel or cardboard.

Bernhardt Recliners Diagram

Bernhardt doesn’t publish universal exploded diagrams online; request model‑specific documentation via customer care or your retailer. Start here and include your serial number: Bernhardt Customer Service.

Maintenance Tips to Prevent Bernhardt Recliner Parts Failure

  • Vacuum dust/pet hair from mechanisms every 3–6 months.
  • Inspect cables, springs, and bolts annually; replace in pairs when worn.
  • Use a surge protector and keep the power brick off the floor.
  • Wipe spills immediately; keep liquids away from switches/USBs.
  • Lightly lubricate pivots with silicone spray—avoid greasy overspray on upholstery.
  • Re‑torque wood screws gently to avoid stripping.

Conclusion
You’ve got this—match part numbers and connectors, grab a few basics, and order from reputable sellers. With careful measurements and smart maintenance, your Bernhardt recliner will be back to quiet, buttery‑smooth lounging in no time.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top