How to Replace Power Recliner Switch?

You may face some problems with your power recliner, and most of them are caused by its switch, which is why you need to know how to replace Power recliner switch. To fix and replace the power recliner switch, you need to follow the below process.

Sometimes you need to know if the recliner has some problems like it doesn’t recline properly or is stuck somewhere. Other than that, it has issues with its charging or power switch, which you need to fix or replace with a new switch to work correctly.

Replacing or fixing the power recliner switch is not so hard that you ask a professional to do it for you. The process of power recliner switch replacement is easy, and you can do it by yourself.

All you have to do is follow the procedure given below, and you will be able to replace your power recliner switch.

How to Replace Power Recliner Switch?

The power recliner switch can cause problems when it is out of work or doesn’t work correctly or maybe your recliner switch is broken by mistake. So to fix all these problems, you need to replace them with new ones.

You can call a professional to do it for you if you cannot do it by yourself, but the process is easy, and you can do it if you want to do it yourself.

You will need assistance by carrying the recliner from one place to another or leaning the recliner etc. The tools you will need are a new power switch and a screwdriver.

All you have to do is follow the process step by step, and in the end, you will get a power recliner with a new switch, working as a new one.

Step 1:

The first step is disconnecting the recliner from electricity by removing the plug from the power outlet, which is the apparent option.

Some of the power recliners are powered by batteries, so can the battery be disconnected from that power source? It’s important to disconnect all the power sources before even trying to do anything.

You can also check a proper guide about the query “are power recliners have battery backup or not?“.

Step 2:

Now take the recliner to an open area like an open room or workspace, so you don’t have trouble while working. Ask someone who can assist you to carry the recliner to that place.

Step 3:

It’s time to open the Switch of the recliner to fix or replace it with a new one. For that, you need to remove the top head.

Most recliners have a full head while others don’t, so if your recliner has one top head, remove it by turning it counterclockwise or anti-clockwise. You can remove the head and reach the inner switch by doing it.

Step 4:

In some models of recliners, the switch is nearly located to the armrest, and accessing it can be difficult. So, you have to remove the recliner’s armrest to access it easily and then remove it.

You are ready to go if you can remove the recliner switch without touching the armrest then you should do it.

Step 5:

Now you reach for the actual switch, and some screws tighten that switch. You will need a screwdriver to remove those screws.

After removing the screw, you need to keep those screws somewhere safe because you will need them later.

Also Read: How often do Power Recliner Motors Last?

Step 6:

After that, it’s time to remove the switch from the recliner. First, you have to disconnect the recliner switch from the recliner motors. For that, you need to lean the recliner forward, exposing the recliner’s lower area.

But you have to put something like cloth or newspaper on the floor so it won’t leave any marks on the floor. So, you have to disconnect it from the motor. Then you can remove it properly.

Step 7:

Disconnecting the switch from the motor is easy. All you have to do is to pull it straight, which will remove the switch for you. Don’t twist it or rotate it because it will not only damage the switch but also the recliner too.

Step 8:

Now it’s time to remove the recliner switch from the recliner. After disconnecting it from the power switch, removing the entire switch from the recliner will be easy.

Step 9:

Take the old Switch and replace it with the new one. The process is simple. Just follow the last steps. First, put the switch in the old slots, take the cable, and connect it to the motors. But check the switch before taking everything back to its original place.

Step 10:

Suppose the switch works fine; put the recliner back from its leaning position. Tight the switch with the screws that you remove from it in the first place and put its cover back. Hence your power recliner switch is being replaced.

After checking that the switch is working correctly, you will need to put everything back. To put everything back, you need to reverse the above process and get a fully fixed power recliner.

Conclusion:

Most of the problems in the power recliners are due to the power recliner switch. The recliner switch breaks very often, so you need to replace it with a new one.

The fix of the power recliner switch is easy to press, and you will do it yourself if you follow the steps one by one.

I hope you learn how to fix the power recliner switch, but if you have any doubts about the process or have any questions related to the process, then ask freely in the comment section, and I will get back to you soon as possible.