Need Mcombo recliner parts fast? Here’s a clean, no-fuss guide with real images and quick shop links. Match connectors and model numbers, then grab what you need to get your chair smooth and comfy again.
Buy Mcombo Recliner Parts Online
Common on lift models; look for the 5-pin DIN plug and button layout that matches your chair. Replacing a dead remote often restores all movement instantly. » find on amazon / find on ebay
For models with vibration and lumbar heat. Match icons and connector style so every mode works. Handy replacement when certain zones stop responding. » find on amazon / find on ebay
Standard brick for many Mcombo lift chairs. Verify output (29V) and the 2-pin OI connector (one flat, one round). A weak adapter can cause slow or stuck motion. » find on amazon / find on ebay
Wall-to-adapter cable. Replace frayed or lost cords and ensure your brick sits off the floor to avoid spills or foot traffic damage. » find on amazon / find on ebay
Splits one adapter to two devices (e.g., motor and USB/lighting). Confirm 2-pin OI connectors and total current rating to prevent voltage drop. » find on amazon / find on ebay
Low-profile 2-pin OI cable helps with tight spaces and reduces strain on plugs. Check male/female orientation and length before ordering. » find on amazon / find on ebay
Keeps your lift chair working during outages and lets you place it away from outlets. Verify 2-pin compatibility and recharge schedule. » find on amazon / find on ebay
Drives the lift/recline mechanism. Match model sticker, stroke, and connector type. Replace if the chair grinds, won’t move, or overheats. » find on amazon / find on ebay
Oval panel with integrated socket; mounts in the recliner’s side. Use to replace cracked housings or intermittent power connections. Confirm cutout size and plug style. » find on amazon / find on ebay
Replacement low-voltage adapter for models with built-in USB charging. Make sure the plug matches your harness and check the output rating on the label. » find on amazon / find on ebay
How to Identify the Right Mcombo Recliner Parts
Flip the chair and photograph every label: motor, power brick, switch panel, and remote. Note model numbers, connector styles (2-pin OI, 5-pin DIN), and cable lengths. Measure cutouts and screw spacing. Cross-reference with your manual or the Mcombo product page before ordering. When unsure, message sellers with photos.
Basic Tools for Repairing Mcombo Recliners
- Phillips and flathead screwdrivers
- Allen/hex key set
- Metric/SAE sockets or nut drivers
- Needle-nose pliers and side cutters
- Adjustable wrench
- Multimeter (DC output checks)
- Zip ties and electrical tape
- Silicone spray or white lithium grease
Unplug first. Support the footrest to relieve spring tension. Take photos before unplugging anything to simplify reassembly. Route cables away from scissor arms, secure slack with zip ties, and test the full motion cycle after each repair to confirm connectors and fasteners are seated.
Mcombo Recliners Diagram
Find wiring layouts and assembly diagrams on Mcombo’s official pages. Start with the searchable instruction hub: Product Instruction, and the video/manual index: Assembly Instruction Video. Enter your model number (e.g., 7890, 7040) to locate exact manuals and diagrams.
Maintenance Tips to Prevent Mcombo Recliner Parts Failure
- Vacuum dust from tracks and hinges monthly.
- Lightly lubricate pivot points every six months (avoid electronics).
- Use a surge protector with the 29V adapter.
- Keep cords off the floor and away from scissor mechanisms.
- Tighten loose bolts, brackets, and clips quarterly.
- Don’t exceed weight limits; avoid “plopping.”
- During outages, use a 2-pin battery pack to return upright safely.
Conclusion
Pick parts by connector, measurements, and model stickers, then grab replacements from Amazon or eBay. With a handful of basic tools and the Mcombo manuals above, most fixes are quick wins—hello smooth lifts, cozy reclines, and zero stress.