Need Esright recliner parts fast? You’re in the right spot. Below you’ll find the common bits that wear out—remotes, power gear, cables, and motors—plus quick tips to pick the right replacement. I’ve also dropped helpful Amazon and eBay searches so you can snag parts quickly.
Buy Esright Recliner Parts Online
Universal style up/down handset used on many Esright power recliners and lift chairs. If your chair won’t move or only goes one way, this is a likely culprit. Match the 5-pin DIN plug and button layout before buying. » find on amazon / find on ebay
Powers two seats or dual motors from one transformer. Handy for loveseats or sectional recliners. Make sure the plugs match: one flat, one round pin with locking tabs. » find on amazon / find on ebay
Drives the footrest and backrest. Look for the model number on the motor label (e.g., OKIN JLDQ series) and match stroke length and connectors before replacing. » find on amazon / find on ebay
The wall-to-transformer cord used with many 29V recliner power supplies. If your adapter is fine but there’s no power, this simple cord could be the fix. » find on amazon / find on ebay
For non-powered Esright models with a pull handle. Broken cables cause a loose handle and no latch release. Match barrel size and exposed length for a perfect fit. » find on amazon / find on ebay
Some Esright recliners use a separate massage/heat controller. Replace like-for-like: check plug style and the exact button layout or program icons. » find on amazon / find on ebay
Extends distance from transformer to chair. Useful when your outlet is far or you’re routing around a baseboard. Match the “OI” 2-pin connector type to avoid loose fits. » find on amazon / find on ebay
How to Identify the Right Esright Recliner Parts
Check your chair’s model label, usually under the seat or on the motor housing. Snap a photo of the motor sticker to capture model and stroke numbers. Count pins on plugs (5-pin round for remotes; 2-pin flat/round “OI” for power). Compare button layout, connector shapes, and cable lengths. When in doubt, match parts by model number and connector style.
Basic Tools for Repairing Esright Recliners
- Phillips and flathead screwdrivers
- Metric Allen/hex key set
- Torx driver set (for some brackets)
- Needle-nose pliers and side cutters
- Multimeter (basic voltage check)
- Zip ties and adhesive cable clips
- Silicone spray or dry lube
- Measuring tape and flashlight
Most fixes are plug-and-play. Unplug power first, tip the chair carefully, and photograph cable routing before removal. Replace one component at a time, secure wiring away from moving arms, and test travel fully to ensure nothing pinches. If you hear binding, stop and adjust before continued use.
Esright Recliners Diagram
Esright’s official site lists product details and support. For manuals/diagrams, start at the Customer Help page, which references manuals and installation videos, and browse the Massage Recliner category for model-specific details. Use these as the authoritative references for parts layout and specs: Customer Help and Massage Recliners.
Maintenance Tips to Prevent Esright Recliner Parts Failure
- Keep cables slack and tied away from scissor arms and moving tracks.
- Vacuum under the base to prevent debris from jamming mechanisms.
- Inspect plugs quarterly; reseat any loose 2-pin or 5-pin connectors.
- Use a surge protector to protect 29V transformers and control boxes.
- Lubricate pivot points lightly every 6–12 months.
- Avoid sitting or standing on footrests to reduce actuator stress.
- Coil excess wiring; don’t pinch under rocker bases.
Conclusion
Esright recliners are easy to revive with the right parts and a few basic tools. Match plugs and labels, route cables neatly, and test movement slowly after each swap. With the links above, you’ll track down replacements fast and get back to kicking back.