You are probably looking for how to fix driver seat recliner because car recliners start having issues with use for a while. If you also have issues with your driver recliner reclining, then worry not because, in this article, you will know the complete details about fixing the recliner.
There are some factors that can cause problems for the recliner seat to jam it. The main reason for this is excessive use, putting extra weight, and sometimes using it wrong. These things are responsible for jamming the recliner and not reclining it properly.
Below are some basic steps and processes to fix a defective reclining of driver recliner. After following the process, you can fix your recliner properly. So, without fritter away time, let’s get to it.
Common Problems with Driver Recliners: Let’s Go Deep:
There are reasons which can cause damage to your driver seat. We need to know these reasons and problems and how to fix driver powered seat recliners. Some of the common reasons and problems are given below.
· Wring can cause problems in driver recliners.
· Sometimes, the problem is caused by mechanical and electric failure.
· The time recliner motor broke so that it won’t recline.
· The switch broke, which caused the recliner to recline.
How to Fix the Driver Seat Recliner?
A driver recliner comes across recliner problems and issues, some of which require experts to fix, but you can also do it yourself.
Below are some basic steps that help you fix your driver recliner and how to fix driver power seat recliner slips. So, follow the process step by step, and you will fix your recliner yourself.
Step 1:
First, you need to remove the screws from the driver recliner, which are usually in the back. You need a screwdriver that can remove the screw easily.
Step 2:
Now take the screwdriver and remove the screw from the back of that driver recliner. It should have two or four bolts, so it doesn’t take too much time. The bolts will be on the left and right, so start to remove the one on the right. You will access the splined after removing or unscrewing the bolts on the right.
Once your removal is done on the right side, you will access the bar. The bar was connected to the shaft, but not anymore.
You need to avoid screwing the left side because that holds the shaft, and doing it can remove the shaft completely. If you do, then you have to reconnect the shaft again and restart the process over again.
Step 3:
You will also need some glue in the process. You can use normal glue, but if you are experienced with DIY, you can go with professional-type glue.
The glue is used to connect the spline shaft and keep it tight. So, keep the glue somewhere safe so it will be unable to reach children and not dry out.
It would be best if you placed the glue on the spline shaft so it can connect and attach to another shaft, and that’s the main objective of this step.
Step 4:
It would help if you held that shaft tight in its place so it could dry out correctly. Otherwise, you have to break it and put it back properly. It would be best to ask someone to hold it while applying the glue. That way, it can connect properly.
Step 5:
After that, you need to attach or install the nips to the bar with screws with the help of a screwdriver. After that push, these nips to their fullest degree so they won’t block some other component.
If you can’t do it alone, you need to ask someone to help you; they can try to push it while you can put the screws in place. Please don’t put too much weight on it because it may slide backwards, or you may break it.
Step 6:
After that, you must get a new shaft and replace it with the old one. Don’t be afraid if the new shaft is longer than the old one. It’s normal because it needs to be longer so it can level with the edges of that seat which is why it needs to be normal.
Sometimes the diameter of the recliner shaft is smaller, so it can be slid on the top of the bar. So, it would be best if you avoided smaller-diameter shafts.
Step 7:
In this last step, you need to check the driver recliner properly. If it’s not, then you have to redo the steps properly. Ask in the comment section if you have any issues fixing your driver recliner.
Conclusion:
Most of the driver recliners cause problems after use that need a fix. Some of the problems need an expert to fix, but most of these can be fixed by yourself if you follow the fixing process steps.
If you have a question about how to fix driver seat recliner that won’t recline or how to fix a driver seat recliner, then ask it in the comment section, and I will be there for you as soon as possible.