American Leather Recliner Parts (Buy Replacement Parts)

Chasing a quick fix for your American Leather recliner? Here’s a simple, no‑stress guide to the most common replacement parts—handles, motors, power supplies, and controls—plus how to identify the right piece. We’ll also cover a tiny toolkit that handles most repairs and a few maintenance tips to keep your favorite chair running smoothly.

Buy American Leather Recliner Parts Online

Pull Handle & Release Cable Kit
For manual recliners that won’t open easily. Measure exposed cable length and end fitting (S‑hook, barrel, or D‑pull) to match your original hardware. » find on amazon / find on ebay

Actuator / Linear Motor (Footrest/Headrest)
Power models typically use OKIN/Limoss/KD actuators. Match model number, stroke length, connector type, and mounting clevis to ensure a drop‑in swap. » find on amazon / find on ebay

Power Supply / Transformer (29V)
External 29V DC adapter with safety quick‑disconnect. Confirm voltage, amperage (2–3A typical), and two‑pin vs. five‑pin plugs before ordering. » find on amazon / find on ebay

Hand Control / Switch Panel
2–6 button remotes for power recline, headrest, and lumbar. Match pin count (often 5‑pin), plug orientation, and bezel shape. » find on amazon / find on ebay

Footrest Spring & Pivot Hardware
Restores footrest tension and smooth motion on manual chairs. Replace springs in pairs for balanced action. » find on amazon / find on ebay

Base Swivel / Glide Bearings
Swap worn bearing rings or bushings to eliminate wobble and grinding. Verify diameter, bolt pattern, and stack height. » find on amazon / find on ebay

USB Cup Holder / Power Hub
Drop‑in modules with USB charge ports and lighting. Confirm cutout size and harness style before ordering. » find on amazon / find on ebay

How to Identify the Right American Leather Recliner Parts

Flip your chair and locate the product/serial tag (often under the seat). Photograph the failed part and every connector. Note actuator brand (OKIN/Limoss/KD), model numbers, plug style (two‑pin vs. five‑pin), and stroke length. Measure cables end‑to‑end. When unsure, message the seller with photos for a quick compatibility check.

Basic Tools for Repairing American Leather Recliners

  • Phillips and flat screwdrivers (short + long)
  • Metric/SAE hex key set
  • Socket set + adjustable wrench
  • Needle‑nose pliers; snap‑ring pliers
  • Multimeter (basic voltage checks)
  • Zip ties, electrical tape, blue threadlocker

A bright flashlight or headlamp helps under the chair. Always unplug power before working and label connectors with masking tape. Take photos during teardown so reassembly is foolproof. For springs or heavy components, recruit a helper and protect floors with a towel or cardboard.

American Leather Recliners Diagram

For exploded views and model‑specific guidance, contact American Leather customer care or your retailer with your serial number. Start here: American Leather Customer Care.

Maintenance Tips to Prevent American Leather Recliner Parts Failure

  • Vacuum dust/pet hair from mechanisms every 3–6 months.
  • Inspect cables, springs, and bolts annually; replace in pairs when worn.
  • Use a surge protector and keep the power brick off the floor.
  • Wipe spills fast; keep liquids away from switches/USBs.
  • Lubricate pivots lightly with silicone spray—avoid greasy overspray.
  • Re‑torque wood screws gently to avoid stripping.

Conclusion
You’ve got this! Match part numbers and connectors, grab a few basic tools, and order from reputable sellers. With a little patience and the right replacement, your American Leather recliner will be back to smooth, quiet lounging in no time.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top